Polaris Full Size Ranger with Round Roll Bars Dot Weld Clear Full Windshield
SSL Secure and
Privacy Guaranteed
SSL Secured
Expert Support
Product Description
When you are working in the fields or driving down the trail to your favorite hunting spot in your Full Size Polaris Ranger you are going to want to be protected from the cold air in the winter and the debris that can fly up all year round. There is no better way to get that needed protection than with a windshield. Here at Side By Side Stuff we offer you the Dot Weld Full Front Windshield.
Constructed from 1/4 inch thick UV stabilized and shatter proof polycarbonate you will not have to remove this windshield when towing your machine. Finished with a full length rubber seal you are getting a contoured, professional fit every time!
Constructed from 1/4 inch thick UV stabilized and shatter proof polycarbonate you will not have to remove this windshield when towing your machine. Finished with a full length rubber seal you are getting a contoured, professional fit every time!
Fitment
- 2021 Polaris Full Size Ranger 570 (with round roll bars) -
- 2021 Polaris Full Size Ranger Crew 570-6 (with round roll bars) -
- 2020 Polaris Full Size Ranger Crew 570-6 (with round roll bars) -
- 2020 Polaris Full Size Ranger 570 (with round roll bars) -
- 2019 Polaris Full Size Ranger 570 (with round roll bars) -
- 2019 Polaris Full Size Ranger Crew 570-6 (with round roll bars) -
- 2018 Polaris Full Size Ranger Crew 570-6 (with round roll bars) -
- 2018 Polaris Full Size Ranger 570 (with round roll bars) -
- 2017 Polaris Full Size Ranger 570 (with round roll bars) -
- 2017 Polaris Full Size Ranger Crew 570-6 (with round roll bars) -
- 2016 Polaris Full Size Ranger Crew 570-6 (with round roll bars) -
- 2016 Polaris Full Size Ranger 570 (with round roll bars) -
- 2016 Polaris Ranger 800 6x6
- 2015 Polaris Ranger 800 6x6
- 2014 Polaris Ranger Diesel -
- 2014 Polaris Ranger 800 6x6
- 2014 Polaris Ranger Diesel Crew -
- 2014 Polaris Ranger Diesel Deluxe
- 2014 Polaris Ranger XP 800 -
- 2014 Polaris Full Size Ranger 800 Crew -
- 2013 Polaris Full Size Ranger 800 Crew -
- 2013 Polaris Ranger XP 800 LE
- 2013 Polaris Ranger XP 800 -
- 2013 Polaris Ranger XP 800 EPS
- 2013 Polaris Ranger Diesel Crew -
- 2013 Polaris Ranger 800 6x6
- 2013 Polaris Ranger Diesel -
- 2012 Polaris Ranger 800 6x6
- 2012 Polaris Ranger Diesel Crew -
- 2012 Polaris Ranger 800 XP HD EPS
- 2012 Polaris Ranger Diesel -
- 2012 Polaris Ranger XP 800 EPS
- 2012 Polaris Ranger XP 800 -
- 2012 Polaris Full Size Ranger 800 Crew -
- 2011 Polaris Full Size Ranger 800 Crew -
- 2011 Polaris Ranger XP 800 HD
- 2011 Polaris Ranger XP 800 -
- 2011 Polaris Ranger XP 800 EPS
- 2011 Polaris Ranger 800 6x6
- 2010 Polaris Full Size Ranger 800 HD
- 2010 Polaris Ranger XP 800 -
- 2010 Polaris Full Size Ranger 800 Crew -
- 2010 Polaris Full Size Ranger 800 Crew EPS
- 2009 Polaris Ranger XP 700 -
Features
- 1/4 inch thick U.V. stabilized and shatter proof polycarbonate
- Contoured to hood with full length rubber seal
- Rubber cushioned mounting clamps and hardware for solid, no noise mounting
- No need to remove windshield when towing vehicle
- Excellent finish with smooth rounded edges
Important Info
- Cannot ship outside the lower 48 states
PLEASE READ: Upon receipt of your windshield and prior to removing the protective film
- Inspect for any damages, including scratches protruding through the protective film
- Ensure product satisfaction
- Confirm correct fitment
View Cleaning and Care InstructionsCustomer Reviews
Product Reviews
Windshield fitment, October 23, 2017Posted By: Donald Eldridge - verified customer
24 people found this review helpful
Windshield is a good fit except for around the cowling. The rough cut material does not provide a close fit. it is also very hard to get the molding to fit properly. Other than that fitment was good and easy to install. I am not sure how these are cut out but I would recommend that if you have a waterjet machine available it will make a much smoother and more precise cutout for the machine contours. I would recommend the windshield to others as well.
24 people found this review helpful
Windshield is a good fit except for around the cowling. The rough cut material does not provide a close fit. it is also very hard to get the molding to fit properly. Other than that fitment was good and easy to install. I am not sure how these are cut out but I would recommend that if you have a waterjet machine available it will make a much smoother and more precise cutout for the machine contours. I would recommend the windshield to others as well.
Front windshield , February 3, 2017Posted By: Rob Baumann - verified customer
26 people found this review helpful
Purchased front windshield. Good so far. I watched a video on the strength of the windshield and I was sold. My neighbor after the fact told me his cracked in pieces. The video should show the demo in -10 below not just +70 above . He was following his buddy across the lake and a chunk of ice flew up. He got the same windshield from a Polaris Dealer as I purchased from your store. I hope this doesn't happen to me.
26 people found this review helpful
Purchased front windshield. Good so far. I watched a video on the strength of the windshield and I was sold. My neighbor after the fact told me his cracked in pieces. The video should show the demo in -10 below not just +70 above . He was following his buddy across the lake and a chunk of ice flew up. He got the same windshield from a Polaris Dealer as I purchased from your store. I hope this doesn't happen to me.
Great , October 12, 2016
Good windshield, September 17, 2016Posted By: Maxwell Carter - verified customer
24 people found this review helpful
Good windshield, with me putting extra bracing and clamps at top. At speed the top is pushed in by the wind to the point of the roll bar. I have a rearview mirror mounted and it hits it causing it to dislocate.
24 people found this review helpful
Good windshield, with me putting extra bracing and clamps at top. At speed the top is pushed in by the wind to the point of the roll bar. I have a rearview mirror mounted and it hits it causing it to dislocate.
Dot weld windsheild, September 3, 2016Posted By: Cortney D Hopper
25 people found this review helpful
Good quality, only issues it states in the description can be towed without removal. You can tow but the windshield bows in at the top because there are no mounts in the middle. The first time i cleaned it with a paper towel and water it scratched. Also there is a gap between the front crowl and the windshield where it was not cut correctly.
25 people found this review helpful
Good quality, only issues it states in the description can be towed without removal. You can tow but the windshield bows in at the top because there are no mounts in the middle. The first time i cleaned it with a paper towel and water it scratched. Also there is a gap between the front crowl and the windshield where it was not cut correctly.
Click here to review this product
(Reviews are subject to approval)
(Reviews are subject to approval)
Questions & Answers
